A Step-by-Step Guide by JaySecure
Step 1: Site Assessment and Consultation
Before a single hole is dug, the Jay Secure team visits your property to assess the site.
We look at the terrain, soil type, existing structures, and your specific security or privacy
needs hence recommended fence design. We also listen to you —what do you want the
fence to achieve?
Why this matters: Every property is different. A fence that works on flat ground may need a
completely different approach on a slope. Getting this step right means no expensive
surprises later.
* We charge for this and refund 50% of the amount charged (based on location) from project cost.
Step 2: Planning and Measurements
Once we understand your needs, we carefully measure the area to be fenced. We mark out the
boundary line, note any obstacles like trees or drainage channels, and calculate exactly how
much material will be needed.
Why this matters: Accurate measurements mean no wasted materials and no gaps or shortfalls
in your fence line. This step keeps costs predictable and the final result neat and professional.
Step 3: Obtaining Permits (Where Required)
In some areas, putting up a fence —especially a tall or boundary fence —requires approval
from local authorities. Jay Secure handles this process on your behalf, submitting any necessary
applications before work begins.
Why this matters: Building without the right permits can result in fines or being forced to take
the fence down. We make sure everything is above board from the start.
Step 4: Marking and Clearing the Fence Line
The fence line is clearly marked out on the ground, usually with pegs and string or spray paint.
Any vegetation, rocks, or debris along the line is removed to give a clean working path.
Why this matters: A clearly marked and clean fence line ensures the fence runs straight and true.
It also keeps the installation team safe and makes the work faster and more efficient.
Step 5: Digging the Post Holes
Using the right equipment for the soil type —whether a manual post hole digger, an auger, or a
mechanical drill —holes are dug at regular intervals along the fence line. The depth of each hole
depends on the height of the fence; a taller fence needs deeper holes.
Why this matters: Post holes are the foundation of your fence. If they are too shallow, the posts
will lean or fall over time. Getting the depth right ensures a strong, stable fence that stands for years.
Step 6: Setting the Corner and Gate Posts First
The corner posts and any gate posts are put in first. These are often set in concrete to give them
extra strength, and they are checked with a spirit level to make sure they are perfectly upright (plumb).
Why this matters: Corner posts and gate posts carry the most stress. Setting them first —and
setting them correctly —gives the entire fence its shape and alignment. If these are off, the whole
fence will be off.
Step 7: Setting the Line Posts
With the corner posts in place, the remaining posts (called line posts) are installed in between.
A string line is stretched between the corner posts to ensure all the line posts sit at the same height
and in a straight line.
Why this matters: Consistency in post height and alignment gives the fence a clean, professional
appearance and ensures the fencing panels or wire fit correctly between the posts.
Step 8: Allowing Concrete to Cure
Where posts have been set in concrete, the concrete is left to cure (harden and set) for the
recommended time —usually at least 24 to 48 hours —before any further work continues.
Why this matters: Rushing this step is one of the most common mistakes in fence installation.
Attaching panels, chainlink or wire before the concrete has fully set can cause posts to shift,
leaving you with a crooked fence.
Step 9: Installing the Fencing Panels, Wire, Chainlink
Once the posts are firm and secure, the fencing material is attached. This could be welded mesh
panels, chain-link wire, wooden boards, palisade steel, or any other fencing type. Rails
(horizontal supports) may also be fitted between posts to add rigidity.
Why this matters: This is where your fence takes its final shape. Proper tensioning of wire
or secure fixing of panels ensures the fence is both strong and good-looking. A loose or sagging
fence is both unsightly and easy to breach.
Step 10: Installing Gates
Gates are hung on the gate posts, with hinges fitted to allow smooth opening and closing.
Latches, locks, or access control hardware are then fitted according to the client’s security
requirements.
Why this matters: A gate is the main point of entry and exit, and also the most vulnerable
part of any fence. A properly hung, well-secured gate completes your perimeter and gives you
control over who comes in and out.
Step 11: Final Inspection and Finishing
The entire fence line is walked and inspected. We check for any loose fixings, sharp edges,
uneven sections, or areas that need touching up. Any protective coating or paint is applied if
required, and the site is cleaned up.
Why this matters: A final inspection catches small issues before they become big problems. It
also means you receive a finished product you are proud of —not one that looks like it was done
in a hurry.
Step 12: Client Walk-through and Handover
The last step is walking the completed fence with you, the client. We point out key features,
explain how to maintain your fence, and make sure you are fully satisfied before we consider
the job done.
Why this matters: Your satisfaction is the measure of our success. This walk-through gives
you confidence in what has been installed and ensures you know how to keep it in great
condition for years to come.
Why Choose Jay Secure?
At Jay Secure, we follow every one of these steps —every single time. We do not cut
corners, because your security depends on a fence that is built right. From the first site visit
to the final handover, we are with you all the way.
Contact Jay Secure today for a site assessment, expert fencing solution and a quotation.
📞 Call us: +254 732 714004 WhatsApp: +254 722 714004
